AJAX KeyPad S Plus Jeweler Manual page 8

The ID and number of the device can be found in its
Adding to the system
KeyPad S Plus is incompatible with Hub and third-party security control panels.
To connect KeyPad S Plus to the hub, the device must be located at the same
secured facility as the system (within the range of the hub radio network). For
the detector to work via the
rst add the detector to the hub, then connect it to ReX or ReX 2 in the settings
of the range extender.
The hub and the device operating at different radio frequencies are incompatible. The
radio-frequency range of the device may vary by region. We recommend purchasing and
using Ajax devices in the same region. You can check the range of operating radio
frequencies with the
Before adding a device
1. Install an Ajax PRO app
2. Create an account
make the necessary settings, and create at least one
3. Ensure the hub is switched on and has internet access via Ethernet, Wi-Fi
and/or mobile network.
4. Ensure the hub is disarmed and does not start updating by checking its
status in the Ajax app.
This product line is developed for projects. Only accredited Ajax Systems partners can
install and administer Superior products.
ReX or ReX 2 radio signal range extender
technical support service
.
if you don't have one. Add a compatible hub to the app,
States in the Ajax app.
.
virtual room
, you must
.