Technical Speci Cations - AJAX KeyPad S Plus Jeweler Manual

Check the functioning of your keypad regularly. This can be done once or twice a
week. Clean the device enclosure of dust, cobwebs, and other contaminants as
they emerge. Use soft dry wipes suitable for equipment care.
Do not use substances that contain alcohol, acetone, petrol, and other active
solvents to clean the detector. Wipe the touch keypad gently: scratches can
reduce the sensitivity of the keypad.
The batteries installed in the keypad provide up to 4,5 years of autonomous
operation at default settings. If the battery is low, the system sends appropriate
noti cations, and the
after each successful code entry.
KeyPad S Plus can work for up to 2 months after the low battery signal.
However, we recommend you replace the batteries immediately upon
noti cation. It is advisable to use lithium batteries. They have a large capacity
and are less affected by temperatures.
How to replace batteries in KeyPad S Plus

Technical Speci cations

All technical speci cations of KeyPad S Plus Jeweller
Compliance with standards
X (Malfunction) indicator smoothly lights up and goes out