AJAX KeyPad S Plus Jeweler Manual page 25

Group security management with a personal code
1. Activate the keypad by swiping your hand over it.
2. Enter the User ID.
3. Press the * (Function button).
4. Enter your personal code.
5. Press the * (Function button).
6. Enter the Group ID.
7. Press the button
For example, to arm the group:
If a group is assigned to KeyPad S Plus (in the Group Management eld in the
keypad settings), you do not need to enter the group ID. To manage the security
mode of this group, entering a personal code is su cient.
Security control of the entire object using an access code
1. Activate the keypad by swiping your hand over it.
2. Enter the Access code.
3. Press the button
For example, to arm the system:
Security management of the group using a common code
1. Activate the keypad by swiping your hand over it.
2. Enter the Access code.
3. Press the * (Function button).
(Arm), (Disarm) or
2 → * → 1234 → * → 5 →
(Arm), (Disarm) or
1234 →
( Night Mode ).
( Night Mode ).