Duress Code - AJAX KeyPad TouchScreen User Manual

KeyPad TouchScreen User manual | Ajax Systems Support

Duress code

KeyPad TouchScreen supports duress code. It allows you to
simulate alarm deactivation. In this case, the
sirens installed at the facility will not give away your actions. Still,
the security company and other security system users will be
alerted about the incident.
Learn more
User pre-authorization
Pre-authorization feature is necessary to block access to the
control panel and current system state from unauthorized persons.
The feature activates separately for the Control
tabs in the keypad
The screen for entering the code is displayed on the tabs for which
pre-authorization is activated. The user should authenticate Drst:
enter a code or bring a personal access device to the keypad. The
exception is the Alarm
send an emergency signal.
Unauthorized Access Auto-Lock
If a wrong code is entered or non-veriDed access device is used
three times in a row within 1 minute, the keypad will be locked for
the time speciDed in its
all codes and access devices while informing the security system
https://support.ajax.systems/en/manuals/keypad-touchscreen/
settings .
tab, which allows unauthorized users to
settings . During this time, the hub will ignore
Ajax app and the
and Scenarios
14.08.2023, 17:03
Page 12 of 83