AJAX KeyPad S Plus Jeweler Manual page 13

Permanent Deactivation
One-Time Deactivation
Firmware
Device ID
Device No.
Settings
To change KeyPad S Plus settings in the Ajax apps:
Shows the status of the device permanent
deactivation setting:
No — the device operates in the normal
mode.
Lid only — the hub administrator has
disabled noti cations about triggering of the
device tamper.
Entirely — the detector is entirely excluded
from the operation of the system. The
device does not execute system commands
and does not report alarms or other events.
Learn more
Shows the status of the device one-time
deactivation setting:
No — the device operates in the normal
mode.
Entirely — the detector is entirely excluded
from the operation of the system for a time
the armed mode is active. The device does
not execute system commands and does
not report alarms or other events.
Lid only — noti cations on the tamper
triggering are disabled for a time the armed
mode is active.
Learn more
Device rmware version.
Device ID. Also, available on the QR code on the
detector enclosure and its package box.
Number of the device loop (zone).