Function Button - AJAX KeyPad S Plus Jeweler Manual

KeyPad S Plus can be used in low-light conditions as it has a backlight. Pressing
the buttons is accompanied by a sound signal. The backlight brightness and
keypad volume are adjustable in the settings. If the keypad is not touched for 4
seconds, KeyPad S Plus reduces the backlight brightness. After 8 seconds of
inactivity, it enters power-saving mode and turns off the display.
If the batteries are discharged, the backlight turns on at the minimum level, regardless of
the settings.

Function button

KeyPad S Plus has a Function button that operates in 3 modes:
Off — the button is disabled, and nothing happens after it is pressed.
Alarm — after the Function button is pressed, the system sends an alarm to
the security company monitoring station and all users.
Mute interconnected re detectors alarm — after the Function button is
pressed, the system mutes the alarm of Ajax re detectors. Available only if
an Interconnected Fire Detectors Alarm
Service → Fire detectors settings).
Learn more
is enabled (Hub → Settings
→