AJAX KeyPad S Plus Jeweler Manual page 18

One-Time Deactivation
User Guide
Unpair Device
Entry and exit delays are set in the corresponding detector settings, not in the keypad
settings.
What is Delay When Entering/Leaving
Codes setting
Ajax system allows you to set up a keypad code, as well as personal codes for
users added to the hub. This is convenient, for example, to provide a cleaning
company with access to security management.
Keypad access code
To generate a keypad access code, in apps:
Allows the user to disable events of the device
until the rst disarm.
Three options are available:
No — the device operates in the normal
mode.
Lid only — noti cations on the tamper
triggering are disabled for a time the armed
mode is active.
Entirely — the detector is entirely excluded
from the system's operation when the armed
mode is active. The device does not execute
system commands or alarms or other
events.
Learn more
Opens KeyPad S Plus user manual in the Ajax
app.
Disconnects KeyPad S Plus from the hub and
deletes its settings.