AJAX KeyPad S Plus Jeweler Manual page 27

1. Activate the keypad by swiping your hand over it.
2. Enter the User ID.
3. Press the * (Function button).
4. Enter the personal duress code.
5. Press the (Disarm) button.
For example:
To use a duress code of a person who is not registered in the system
1. Activate the keypad by swiping your hand over it.
2. Enter the duress code.
3. Press the (Disarm) button.
For example:
Security management using Tag or Pass
1. Activate the keypad by swiping your hand over it. KeyPad S Plus will beep (if
enabled in the settings) and turn on the backlight.
2. Bring Tag or Pass to the keypad pass/tag reader. It is marked with wave
icons.
3. Press the Arm, Disarm, or Night Mode button on the keypad.
Note that if Easy armed mode change is enabled in KeyPad S Plus settings, you do not
need to press the Arm, Disarm, or Night Mode button. The security mode will change to
the opposite after tapping Tag or Pass.
2 → * → 4422 →
4567 →