AJAX KeyPad S Plus Jeweler Manual page 26

4. Enter the Group ID.
5. Press the button
For example, to arm the group:
What is Group ID
Using a duress code
A duress code enables you to simulate alarm deactivation. In this case, the Ajax
app and sirens installed at the facility will not disclose your actions, but the
security company and other users will be alerted about the incident. You can
utilize both a personal and a general duress code. In Keypad Access Codes, you
can set up a duress code for individuals not registered in the system.
Scenarios and sirens react to disarming under duress in the same way as to normal
disarming.
Learn more
To use a keypad general duress code
1. Activate the keypad by swiping your hand over it.
2. Enter the general duress code.
3. Press the (Disarm) button.
For example:
To use a personal duress code of registered user
(Arm), (Disarm) or
1234 → * → 2 →
4321 →
( Night Mode ).