Beckhoff EL3692 Manual page 58

Commissioning
Fig. 32: Selection of the target system
Use "Search (Ethernet)..." to enter the target system. Thus another dialog opens to either:
• enter the known computer name after "Enter Host Name / IP:" (as shown in red)
• perform a "Broadcast Search" (if the exact computer name is not known)
• enter the known computer – IP or AmsNetID
Fig. 33: specify the PLC for access by the TwinCAT System Manager: selection of the target system
Once the target system has been entered, it is available for selection as follows (a correct password may
have to be entered before this):
After confirmation with "OK", the target system can be accessed via the System Manager.
58 Version: 3.1 EL3692