Input Data - Beckhoff EL3692 Manual

Index 80n2SAI User Data (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name
80n2:0 SAI User Data
80n2:0m Range x 2/4W offset
(odd)
80n2:0m Range x 2/4W gain
(even)
5.12.5

Input data

Index 60n0 SAI Inputs (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name
60n0:0 TC Inputs Ch.1
60n0:01 Underrange
60n0:02 Overrange
60n0:03 Extended Range
60n0:03 Data invalid
60n0:05 Range invalid
60n0:06 Autorange disabled
60n0:07 Error
60n0:09 Steady state
60n0:0F TxPDO State
60n0:10 TxPDO Toggle
60n0:11 Value
Index 60n1 SAI Range (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name
60n0:0 TC Inputs Ch.1
60n1:05 Mode
60n1:09 Range
Index 60n2 SAI Inputs Real (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name
60n0:0 TC Inputs Ch.1
60n1:05 Value
EL3692
Meaning
Maximum subindex
one offset value per measuring range for user
calibration
one gain value per measuring range for user
calibration
0x10000 corresponds to 1
Meaning
Maximum subindex
Value below measuring range.
Measuring range exceeded.
Extended measuring range is used.
Input data are invalid.
No valid range selected.
The Autorange function is disabled.
The error bit is set if the value is invalid (wire
breakage, overrange, underrange)
The bit is set if the last four values differ from the full-
scale value by no more than the value of "Steady state
tolerance" (index 0x80n0:3E) / 1024.
Validity of the data of the associated TxPDO (0 = valid,
1 = invalid).
The TxPDO toggle is toggled by the slave when the
data of the associated TxPDO is updated.
Analog input value as INT32
Meaning
Maximum subindex
Current measuring mode:
0: 4-wire measurement
1: 4-wire measurement, single-shot mode
2: 2-wire measurement
3: 2-wire measurement, single-shot mode
Current measuring range:
-1: 10 m - 100 mΩ
0: 100 m - 1 Ω
1: 1 - 10 Ω
2: 10 - 100 Ω
3: 100 - 1k Ω
4: 1 k - 10k Ω
5: 10 k - 100 kΩ
6: 100 k - 1 MΩ
7: 1 M - 10 MΩ
Meaning
Maximum subindex
Analog input value as REAL.
Version: 3.1
Commissioning
Data type Flags Default
UINT8 RO 0x24 (36
UINT32 RW 0x00000000
(0
dec
UINT32 RW 0x10000
(65536
Data type Flags Default
UINT8 RO 0x11 (17
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
BOOLEAN RO 0x00 (0
INT32 RO 0x0000 (0
Data type Flags Default
UINT8 RO 0x09 (9
Bit-Field[4] RO 0x00 (0
UINT8 RO 0x00 (0
Data type Flags Default
UINT8 RO 0x01 (1
REAL RO 0x00 (0
)
dec
)
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
169