Firmware Compatibility - Beckhoff EL3692 Manual

6.2

Firmware compatibility

Beckhoff EtherCAT devices are delivered with the latest available firmware version. Compatibility of firmware
and hardware is mandatory; not every combination ensures compatibility. The overview below shows the
hardware versions on which a firmware can be operated.
Note
• It is recommended to use the newest possible firmware for the respective hardware
• Beckhoff is not under any obligation to provide customers with free firmware updates for delivered
products.
Risk of damage to the device!
Pay attention to the instructions for firmware updates on the separate page [} 178]. If a device is placed in
BOOTSTRAP mode for a firmware update, it does not check when downloading whether the new firmware
is suitable. This can result in damage to the device! Therefore, always make sure that the firmware is
suitable for the hardware version!
EL3692
Hardware (HW) Firmware (FW)
01 - 03 01
02
03
03 - 10 04
05
06
11 - 12* 06*
EL3692-0020
Hardware (HW) Firmware (FW)
09 – 12* 05
06*
EL3692-0030
Hardware (HW) Firmware (FW)
12* 06*
This is the current compatible firmware/hardware version at the time of the preparing this documentation.
Check on the Beckhoff web page whether more up-to-date documentation is available.
EL3692
NOTICE
Revision no.
EL3692-0000-0016
EL3692-0000-0017
EL3692-0000-0018
EL3692-0000-0019
EL3692-0000-0020
EL3692-0000-0021
Revision no.
EL3692-0020-0016
EL3692-0020-0020
EL3692-0020-0021
Revision no.
EL3692-0030-0021
Version: 3.1
Appendix
Date of release
2011/02
2011/02
2011/02
2011/06
2011/11
2012/10
2014/08
2017/07
Date of release
2013/12
2014/08
2017/07
Date of release
2020/01
177