Table of Contents
Advertisement
Fig. 29: Relationship between user side (commissioning) and installation
Insertion of certain components (I/O device, terminal, box...) by users functions the same way as in
TwinCAT 2 and TwinCAT 3. The descriptions below relate solely to the online procedure.
Example configuration (actual configuration)
Based on the following example configuration, the subsequent subsections describe the procedure for
TwinCAT 2 and TwinCAT 3:
• CX2040 control system (PLC) including CX2100-0004 power supply unit
• Connected to CX2040 on the right (E-bus):
EL1004 (4-channel digital input terminal 24 V
• Linked via the X001 port (RJ-45): EK1100 EtherCAT Coupler
• Connected to the EK1100 EtherCAT Coupler on the right (E-bus):
EL2008 (8-channel digital output terminal 24 V
• (Optional via X000: a link to an external PC for the user interface)
EL3692
)
DC
; 0.5 A)
DC
Version: 3.1
Commissioning
55
Advertisement
Table of Contents
