1
Getting Started
Protecting Empty Module Slots
Fitting Blind Panels for Front-Loadable Module Slots
12
Fitting a Blind Panel or Filler Module helps to:
•
prevent dust pollution and
•
optimize cooling by guiding the air flow.
To fit the a blind panel (part number - 08163-40199), perform the
following procedure:
1
Position the blind panel as shown in
end closest to the handle against the bottom edge of the slot.
Figure 1
2
Push the top of the blind panel so that it clicks into position.
To remove a blind panel, pull the handle.
NOTE
Fitting a Blind Panel
Keysight 81960A Compact TLS Module User's Guide
Figure 1
on page -12. Position the