I Dup/Tone Set Mode Items - Icom IC-91A Instruction Manual

D D Memory bank link function
Sets the memory bank link function ON
link function provides continuous bank scan, scanning all con-
tents in the selected banks during bank scan.
• Bank link setting
q Rotate [DIAL]
† to select the bank that you want to change
setting.
BANK LINK BANK LINK
BANK-A:ON BANK-A:ON
r
BANK-B:ON BANK-B:ON
BANK-C:ON BANK-C:ON
BANK-D:ON BANK-D:ON
BANK-E:ON BANK-E:ON
w Push [5/SKIP](ï)
† to enter the bank setting condition.
e Rotate [DIAL]
† to select the setting.
BANK-A BANK-A
OFF OFF
ON ON
r
r Push [5/SKIP](ï)
† to set and return to the BANK LINK
screen.
t Rotate [DIAL] to select next bank and repeat steps w to
†
r, or push [MENU/LOCK] to exit scan set mode.
and OFF. The
(default)
BANK LINK
BANK-V:ON BANK-V:ON
\
BANK-W:ON BANK-W:ON
BANK-X:ON BANK-X:ON
BANK-Y:ON BANK-Y:ON
BANK-Z:ON BANK-Z:ON
r
BANK-A
OFF OFF
r
ON ON
MENU SCREEN OPERATION

I DUP/TONE set mode items

D D Offset frequency
Sets the offset frequency for duplex
0 to 159.995 MHz range.
OFFSET FREQ
0.000.00 0.000.00
The default value may differ according to the selected fre-
quency band
(before accessing DUP/TONE set mode)
ceiver version.
The selected tuning step in VFO mode is used for setting
the offset frequency.
D D Repeater tone frequency
Selects subaudible tone frequency for accessing a repeater,
etc. Total of 50 tone frequencies
REPEATER TONE
88.5 88.5
11
operation within
(repeater)
OFFSET FREQ
159.995.00 159.995.00
and trans-
are available.
(67.0–254.1 Hz)
(default: 88.5)
REPEATER TONE
254.1 254.1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
97