I Mode Selection - Icom IC-E91 Instruction Manual

I Mode selection

D D VFO mode
VFO mode is used to set the desired frequency.
➥ Push [VFO] to select VFO mode.
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for both transmitting and receiving are generated
and controlled by the VFO.
• VFO mode indication
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
145 000
25
A
MemoName
P SKIP
µ 000 000
LOW LOW
ATT ATT
FREQUENCY AND CHANNEL SETTING
D D Memory mode
Memory mode is used for operation on memory channels
which store programmed frequencies.
q Push [MR] to select memory mode.
• "µ µ
" appears when memory mode is selected.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed memory channels can be selected.
• Enter the memory channel directly to select the desired memory
channel. (p. 64)
• See p. 66 for memory programming details.
4
• Memory mode indication
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
145 000
25
A
MemoName
P SKIP
000 000
µ
LOW LOW
ATT ATT
Appear
4
15