Icom IC-91A Instruction Manual page 48

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
D D Repeater operation in the same zone
qSet the desired repeater's frequency, offset and shift direc-
tion in B band.
(p. 00)
• Select DV mode in advance. (p. 00)
w Set your own call sign.
• See p. 00 for your own call sign programming.
e Set the desired station call sign.
• See p. 00 for station call sign programming.
r Set the repeater's call sign as follows;
z Enter "R1" in call sign set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
xRotate [DIAL] †
cPush [5/SKIP](ï) to set the call sign for "R1."
• Return to CALL SIGN screen.
vRotate [DIAL] †
• RPT2 CALL SIGN screen is displayed.
bRotate [DIAL] †
call sign.
same zone)
• Select "NOT USE✱" when not operating RPT2.
nPush [5/SKIP](ï) to set the call sign for "R2."
• Return to CALL SIGN screen.
CALL SIGN
r
mPush [MENU/LOCK] to return to frequency indication.
42
(p. 00)
(pgs. 00, 00)
➪
CALL SIGN R1
†
, then push [5/SKIP](ï)
to select the nearest repeater's call sign.
to select "R2" then push [5/SKIP](ï)
to select the desired repeater's
UR:CQCQCQ UR:CQCQCQ
R1:RPT1AA R1:RPT1AA
R2:NOT USE* R2:NOT USE*
MY:MYCALL MY:MYCALL
/IC91 /IC91
t Push [PTT] to transmit; release to receive.
†
.)
†
.
(in the
[DIAL] ↔ [2/SCAN](∫ ∫ )/[8/TS](√ √ )
†
[5/SKIP](ï) ↔ [6/M.N](≈ ≈ )