FIGURE 10
1
2
6. If installing a single device only, proceed to
Wall mount installation
Use the following items to wall mount the device directly to a wall:
•
•
•
•
•
•
•
To mount the device to a wall using the wall mount brackets, see
wall mount
NOTE
When mounting the device on a wall, Brocade recommends that you mount the device with the port
side down.
Complete the following steps to mount the device directly to a wall.
Brocade ICX 6450-C Compact Switch Hardware Installation Guide
53-1002817-02
Installing the device in a two-post rack
Rack-mounting screws
Cage nuts
multiple devices, mount them in the rack, one below the other.
#2 Phillips screwdriver
Hammer
Drill
Wall mount anchors
Wall mount screws
Wall Mount Holes Location template
tape
brackets".
Installing the device
"Powering on the system"
"Wall mount installation using
2
on page 29. If installing
17