Port, System, And Power Status Leds; Port Status Leds - Brocade Communications Systems Brocade ICX 6450-C Hardware Installation Manual

1

Port, system, and power status LEDs

The other 2 uplink ports are 1G small form factor pluggable (SFP) ports (ports F1 and F2), which
reside on slot 3 of the switch. In future releases they can be used for stacking, though the stacking
functionality is not available in release 08.0.00. The SFP ports support 100Mbps/1GbE port
speeds.
For information about supported SFP transceivers, refer to the following Brocade website:
MACsec Ports
The ICX 6450-C device provides 8 ports that are MACsec-capable, as shown in
FIGURE 4
Port, system, and power status LEDs
An ICX 6450-C device include LEDs that indicate the status of device components:
•
•
•

Port status LEDs

Figure 5
FIGURE 5
1
2
4
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/Optics_
DS.pdf
MACsec-capable ports on an ICX 6450-C12-PD device
"Port status LEDs"
"System status LEDs" (including power status LEDs)
"Network connection status LEDs"
shows the location of the port status LEDs on the ICX 6450-C12-PD model.
Port status LEDs an ICX 6450-C12-PD device
Port status LEDs
PoE/PoE+ LEDs
2
1 2 1
Brocade ICX 6450-C Compact Switch Hardware Installation Guide
Figure 4.
53-1002817-02