Brocade Communications Systems Brocade ICX 6450-C Hardware Installation Manual page 32

2
Installing the device
1. Using a Phillips screwdriver, attach the wall mount brackets to the sides of the device using
FIGURE 14
2. Drill two holes on the wall where you want to mount the device, as illustrated in
3. Hammer two wall mount anchors into the holes on the wall, as illustrated in
4. Use the two wall mount screws to fasten the device to the wall mount anchors, as illustrated in
22
four sink-head screws, as illustrated in
Attaching the wall mount brackets for an ICX 6450-C device
Figure 15.
Figure 14.
Brocade ICX 6450-C Compact Switch Hardware Installation Guide
Figure 15.
Figure 15.
53-1002817-02