Wall Mount Installation - Brocade Communications Systems ICX 6430 Hardware Installation Manual

Installing the device

Wall mount installation

NOTE
You need a #2 Phillips screwdriver, a hammer, and a drill for wall mount installation.
Mounting the device to a wall is only applicable to ICX 6430-24, ICX 6430-24P, ICX 6450-24, and ICX 6450-24P devices. Brocade
recommends that you wall mount the device with the port side down.
NOTE
The ICX 6430-48, ICX 6430-48P, ICX 6450-48, and ICX 6450-48P devices cannot be wall mounted.
Complete the following steps to mount the device to a wall.
1. Attach the four adhesive feet to the bottom of the device.
32
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03