Brocade Communications Systems Brocade ICX 6450-C Hardware Installation Manual page 37

Mounting the device under a metal desk
NOTE
When mounting the device on a vertical metal surface, Brocade recommends that you mount the
device with the port side down.
CAUTION
Do not mount the ICX 6450-C device directly underneath a desktop surface with the top panel
facing downward. Only mount the ICX 6450-C device underneath a desktop by attaching it to the
metal side surface of the desk, with the front panel and ports facing downward.
Complete the following steps to securely mount an ICX 6450-C device under a metal desktop:
1. Ensure that the magnet sheet is attached to the bottom panel of the device. See
2. Place the bottom panel of the device with the magnet sheet attached under the metal desk,
Brocade ICX 6450-C Compact Switch Hardware Installation Guide
53-1002817-02
Figure 16.
against the side of the device. Ensure that the front panel (port side) of the device is facing
downward. See Figure 19 and Figure 20.
Installing the device
"" and
2
27