Advertisement
Settings Menu -
Shaft Settings
Seed Shaft Settings
The Seeder can have up to six Smart Shaft Sensors that
indicate shaft rotation. Each Smart Shaft Sensor must be
set.
•
Pulse per Rev: 1
•
Alarm Time: 20 Sec.
Toggle between each "Shaft" by pressing icon "<" or
">". Select "Back" to get to the Settings Menu.
The 20 second Alarm Time is the estimated time it takes
to turn around after each pass in the field without
sounding the Alarm. This can be adjusted by the operator
if more or less time is required before the Alarm Sounds.
SHAFT SETTINGS
SHAFT 1
PULSE PER
REV:
1
ALARM TIME
20 SEC.
Settings Menu -
Diagnostics
The Diagnostics screen can help in identifying issues with
sensors, harnessing or other items. Status reports for
Battery Voltage, Sensors Learned, MUX Communication
speed and GPS Communication speed are displayed.
Contact Loup Electronics if you need technical support.
DIAGNOSTICS
13.71 V
BATTERY VOLTAGE:
0 Hz
FIN_1:
L_DI_1:
H_DI_1:
H_AI_1:
0.17 V
CURR_1:
H_AI_2:
0.02 V
CURR_2:
4-6
TABLE OF CONTENTS
GPS
SHAFT
RECEIVER
SETTINGS
BACK
DIAGNOSTICS
BACK
MUX: PASS
OPEN
#MUX LEARNED:
OPEN
TEST EXTERNAL
SD: STATUS
0.0 mA0.0 PSI
0.0 mA0.0 PSI
NOR: STATUS
Settings Menu -
GPS Settings
"GPS Settings" defines any Baudrate, Speed
Corrections or the current GPS Status.
GPS SETTINGS
GPS STATUS
GPS SPEED
CORRECTION:
0.0 MPH
GPS Status
The GPS Status screen gives a
diagnostics report of the current
Latitude, Longitude, Number of
Satellites connected and the Type/Quality of the GPS Fix.
If the GPS Icon on the top of screen is Yellow or Red,
check this status page to help identify GPS signal issues.
GPS Baudrate
Sets the baudrate at which the
console communicates with the
GPS receiver you are using.
Available speeds are 4800, 9600,
19200, 38400, and 115200.
SELECT GPS BAUDRATE
4800
38400
GPS Speed Correction
If your GPS is displaying an
incorrect speed reading, use this
screen to add the desired
0
correction in MPH.
GPS
GPS
RECEIVER
SETTINGS
BACK
GPS BAUDRATE
9600
GPS STATUS
GPS BAUDRATE
9600
BACK
9600
19200
115200
GPS SPEED
SHAFT
CORRECTION:
SENSOR
0.0 MPH
0.4 MPH
9K998-2306
Advertisement
