Advertisement
Adjusting
DO NOT
Loosen or Adjust
1/2-13 Locknut
1-8 Nut
Figure 3-12: Rear Seed Box Seed Rate Adjustment
IMPORTANT
DO NOT Loosen or Adjust the 1/2-13 Locknut. See
Figures 3-11 and 3-12.
1. To increase the rate of seeding, loosen the 1-8 Nut
and Seed Rate Adjusting Nut with the supplied
wrenches. Set the Seed Rate Adjusting Nut
appropriate letter with the Adjusting Screw
corresponding number for the desired Seed Rate.
Tighten the 1-8 Nut up to the Bearing.
2. To decrease the rate of seeding, loosen the 1-8 Nut
and Seed Rate Adjusting Nut with supplied wrenches.
Back the 1-8 Nut away from the Bearing. Set the Seed
Rate Adjusting Nut appropriate letter with the
Adjusting Screw corresponding number for the
desired Seed Rate. Tighten the 1-8 Nut up to the
bearing.
Seed Meters discharge to the front of the machine to aid
the operator in determining proper operation. In addition,
reflective amber decals are placed on the seed shafts to
indicate rotation.
3-10
TABLE OF CONTENTS
DO NOT
Loosen or Adjust
Screw
1/2-13 Locknut
Seed
Shaft
Seed Rate
Adjusting Nut
Bearing
9K998-2306
Advertisement
