Advertisement
Turfmaker Sprockets -
Optional
Turfmaker Sprockets provide extra traction in certain soil
types. See your Landoll/Brillion dealer for more
information.
1. Position the Wheel Spacer between each Sand
Wheel. See Figure 2-70.
2. At the end of the process slide a Half Wheel onto the
Drum Pipe next to the last Wheel Spacer.
3. Slide the Clamp Band over the Drum Pipe and next to
the Half Wheel. Position the Clamp Band Socket
Head Bolt (Clamp Band open section) over the weld
seam on the Roller Drum. See Figure 5-3.
4. Insert 1/2-13 x 2-1/2 Socket Head Screw into Clamp
Band, secure with Locknut.
5. Make sure the Wheel Spacers do not bind.
Half Wheel
Sand Wheel
Turfmaker
Wheel Spacer
Figure 2-70: Turfmaker Sprockets
2-46
TABLE OF CONTENTS
Socket Head
Screw,1/2-13
x 2-1/2
Clamp Band
Locknut,1/2-13
9K998-2306
Advertisement
