Advertisement
Pull Type Seeder Assembly
When shipped, Seeder comes assembled except for
Lights, Hub and Spindle Assemblies, Tire and Wheels
Assemblies and Drawbar.
8FT and 10FT Assembly
1. Untie the two rolled up Drawbar Hydraulic Hoses near
the center of the Frame Tube. Ensure the hoses are
not interfering with where the Drawbar is to be
attached.
2. Center Drawbar in relationship with the Seed Box
Center Bracket. Attach Drawbar to Seeder Frame
Tube with 5/8-11 U-Bolts, Lock Washers and
Locknuts. See Figure 2-6.
3. Attach the Hose Holder to the Drawbar with 5/8-11 x
1-1/2 Bolt, Lock Washer and Nut.
4. Install Manual Holder to Drawbar with Hose Clamps.
5. Install SMV Mount to Seed Box Center Bracket with
1/2-13 x 1-1/2 Bolts and Locknuts. See Figure 2-5.
6. Apply anti-seize to Spindles and insert a Hub and
Spindle Assembly into each Wheel Arm. Secure in
with 1/2-13 x 3 Bolts and Locknuts. See Figure 2-9.
12FT Assembly
When shipped, Seeder comes assembled except for
Lights, Hub and Spindle Assemblies, Tire and Wheels
Assemblies and Drawbar.
1. Untie the two rolled up Drawbar Hydraulic Hoses near
the center of the Frame Tube. Ensure the hoses are
not interfering with where the Drawbar and Drawbar
Braces are to be attached. Remove Drawbar Braces
shipping bands so that the Braces can pivot outward
to clear the Seeder Frame Tube.
2. Center Drawbar in relationship with the Seed Box
Center Bracket. Attach Drawbar to Seeder Frame
Tube with 5/8-11 U-Bolts, Lock Washers and Nuts.
Align Braces with the front of the Seeder Frame Tube
and insert the Hydraulic Hoses through the Brace
Bracket opening. Attach Braces to Seeder Frame
Tube with 1/2-13 U-Bolts, Flat Washers and
Locknuts. See Figure 2-7.
3. Attach the Hose Holder to the Drawbar with 5/8-11 x
1-1/2 Bolt, Lock Washer and Nut.
4. Install Manual Holder to Drawbar with Hose Clamps.
5. Apply anti-seize to Spindles and insert a Hub and
Spindle Assembly into each Wheel Arm. Secure in
with 1/2-13 x 3 Bolts and Locknuts. See Figure 2-9.
2-4
TABLE OF CONTENTS
3/8-16
Lock
Washer,3/8
SMV Support
Seed Box
Center
Bracket
Nut,
Flat Washer,3/8
Figure 2-5: SMV Support
SMV
Bolt,
3/8-16 x 1-1/2
9K998-2306
Advertisement
