Pre-Selection Of Brake Intensity And Acceleration - Hermle Z 206 A Instruction Manual

2.2.6 Pre-selection of brake intensity and acceleration

By pressing the key "accel/decel" (5) this function is activated.
By pressing the key once the word "accel" (16) flashes in the display "acc/dec". The desired
acceleration can be pre-selected by the adjusting knob (7). The value 0 is equivalent to the lowest
and the value 9 to the highest acceleration.
By pressing the key "accel/decel" (5) twice, in the display "acc/dec" indicates the word "decel" (17).
Now the desired brake intensity can be pre-selected by the adjusting knob (7). The value 9 is
equivalent to the shortest and the value 0 to longest possible brake time.
16
Photo 15
Acceleration and deceleration times Z 206 A(120 V / 230 V) in seconds
Rotor-Number
220.96 V01
220.97 V01
220.95 V06
220.68 V04
Page 18 of 24
17
Acceleration values
Level 0 Level 9
70 40
80 35
60 11
35 8
INSTRUCTION MANUAL Z 206 A
2 OPERATION
7
5
Deceleration values
Level 0 Level 9
150 35
150 35
30 10
25 7
www.bioecoms.com