Connecting The Power Cable - Ricoh IS450 Operating Instructions Manual

Connecting the Power Cable

This section explains how to connect the power cable to the scanner.
Warning
Only connect the machine to the power source described
on the inside front cover of this manual.
Avoid multi-wiring.
Do not damage, break or make any modifications to the
power cord. Do not place heavy objects on it, pull it hard
or bend it more than necessary. These actions could cause
an electric shock or fire.
Do not plug or unplug the power cord with your hands wet.
Otherwise, an electric shock might occur.
Warning
Be sure to ground the scanner. Failure to ground the
scanner could result in fire or electric shock. If there is no
ground connection available, consult your dealer.
Caution
When you pull out the plug from the socket, grip the plug to
avoid damaging the cord and causing fire or electric shock.
A A A A A
Confirm that the power switch is off.
Connecting the Power Cable
13