Installing Options; Installing The Ieee 1394 Board (Ieee 1394 Interface Board Type S) - Ricoh IS330DC Setup Manual

Getting Started

Installing Options

Installing the IEEE 1394 Board
1
(IEEE 1394 Interface Board
Type S)
Important
Before touching the IEEE 1394
Board, make sure to first touch a
metal object to discharge any static
electricity accumulated in your
body.
Note
Please use only the tools provided
f or r e m ov i n g a n d tig h te n i n g
screws.
A
Check the contents of the box for
the following items:
• IEEE 1394 Interface Board Type
S
• Tools
B
Turn off the power of the scanner
and unplug the Power Cord and
all other cables that are connected
to it.
C
Remove the four screws at the
bottom of the back panel.
12
D
Pull and slide the scanner control
unit out.
Important
The control unit is very heavy.
Be careful not to drop it when
removing.
E
Remove the screw, and then re-
move the cover of the scanner
control unit.
ZDLH130E
ZDLH140E
ZDLH150E
7,19