Advertisement
6)
DISASSEMBLY & ASSEMBLY
(1)
Replacing complete working section
Loosen two tightening bolts with 13mm
spanner.
Taking out the damaged section and
insert new one. Pay attention 2 O-rings on
the internal passage to be in right
position.
Tight M13 nut with proper torque
3.06kgf
m(22.1lbf ft).
Replacing pilot pressure spool
(2)
Loosen 4 screws holding upper part to the
body with 3mm wrench holding mounting
plate no to spring up by return springs
inside.
6-53
100D7RCV02
100D7RCV03
100D7RCV04
100D7RCV05
Advertisement
