10)
ASSEMBLY OF HUB ASSEMBLY
(1)
Assembly of the spacer ring
Coat the seat of the spacer ring on the steering knuckle respective axle spindle with Loctite 572.
Heat the spacer ring to about 100
respective axle spindle.(The steering knuckle respective axle spindle must be free of corrosion)
Oil the seal ring tread onto the spacer ring.
(2)
Hub assembly drive axle
o
C and push it by gently striking onto the steering knuckle
Loctite 572
3-130
100D7XL37
100D7XL38