Advertisement
4. STEERING CYLINDER
1)
STRUCTURE
9
13
8
4
1
Tube assembly
2
Rod assembly
3
Piston seal
4
Gland
5
Du bushing
2)
OPERATION
This machine use to cross connected cylinder for steering operation.
The steering cylinder use a gland(4) to remove piston and sealed seals. Dust wiper(8) located on
the in side of the gland protects cylinder inner parts from dust. The piston is fastened to the rod(2)
by weld.
The piston uses a single piston seal(3) to seal between the piston and tube.
against the tube with two O-rings. The rod is sealed against the gland with a rod seal(6).
7
11
12
6
5
10
2
1
6
Rod seal
7
Back up ring
8
Dust wiper
9
Snap ring
10 O-ring
3
11 Back up ring
12 O-ring
13 Ping bushing
5-8
100D7SS06
The gland seals
Advertisement
