Advertisement
(2)
Securing of the striking nut
The brim of the striking nut has to be sheared only along the slot flank and the corner has to be
bent on the slot ground.
Using of Loctite and other operating supplies
a.
Striking nut at drive flange
- In thread : Assembly paste with MoS
- Front side contact surface : Sealing compound(Epple 33 or equivalent).
b.
Striking nut at through drive pinion
- In thread : Loctite 262.
Striking nut at gear wheels, bearings etc.
- In thread : Assembly paste with MoS
Removing of the striking nut
Bend away the nose and screw off the nut.
100D7XL26
(exception through drive pinion see point Z).
2
.
2
3-124
100D7XL25
Advertisement
