Advertisement
Locate new or repaired working section in
right position according to the order of
functions.
Tighten four nuts (M17) in a crisscross
pattern with proper assembling torque of
4.3kgf
m(31lbf ft).
(2)
Replacing spool & control kit
Loosen 4 screws holding aluminum kits to
the body with 5mm wrench.
Take off all components and O-ring, valve
inside, with attention not to give any
damage to it.
Don't use anything with sharp edge.
6-48
100D7MCV05
100D7MCV06
100D7MCV07
100D7MCV08
Advertisement
