Advertisement
(2)
Pedal plate assembly
1 Pedal cover
2 Lock plate
3 Pedal
4 Stop ring
5 Hexagon bolt
6 Pedal plate
7 Torsion spring
8 Lock pin(pedal)
Pedal plate(6) assembly
- Tool : 6mm torque wrench
- Tightening torque : 2.5~3.0kgf
Pre-assemble pedal assembly(2)(3) and
torsion spring(7) on the pedal plate(6)
with a bar of
12 and then push the bar
with a plastic hammer.
- Tool :
12 bar, plastic hammer.
Lock pin(pedal)(8), stop ring(4).
- Tool : Snap ring plier for axis.
To prevent pedal plate from being
damaged stop ring(4) must be
removed before removing lock pin(8).
m
4-52
100D7BS15
100D7BS16
100D7BS17
100D7BS18
Advertisement
