Advertisement
7)
REAR WIPER AND WASHER SWITCH
OFF
ON
160D7CD47
8)
AUTO/MANUAL CHANGEOVER SWITCH
1
2
3
160D7CD49
9)
INC/DEC SWITCH
OFF
ON
160D7CD50
10)
DIAGNOSTIC SWITCH
OFF
ON
160D7CD51
(1)
This switch is used to operate the rear wiper and washer by two
steps.
First step
: The rear wiper operates.
Second step : The washer liquid is sprayed and the rear wiper is
operated only while pressing. If release the switch,
return to the first step position.
(1)
Manual mode(
)
Press the top of the switch for the manual mode of the autoshift
function. The operator selects the desired speed and the desired
direction in the manual mode with the gear selector lever.
(2)
Automatic 1st mode( )
Place the switch in the middle position for the autoshift function
changing from 1st to 3rd gear shift mode.
(3)
Automatic 2nd mode( )
Press the bottom of the switch fully for the autoshift function
changing from 2nd to 3rd gear shift mode.
(1)
When engine running, the low rpm of engine increase or decrease
by 25rpm by operating this switch.
Engine low rpm returns to normal value when engine restarted.
(1)
When the key switch is ON and engine is not running, turning ON
this switch makes engine ECU automatically flash faults codes.
9) INC/DEC SWITCH is used to sequence forward or backward
through the active faults.
7-26
Advertisement
