Advertisement
No
Symbol
11
12
13
14
15
16
17
T/M MESSAGE
S
T
O
P
- After completing initialization, turn ON the start switch again after turning OFF the switch.
- In case of error, rerun initialization
Meaning
- Truck is not stopped.
(After stopping the truck, restart initialization)
- Gear not on the neutral.
(After putting gear to neutral, restart initializat-
ion)
- Narrow gap between angle and pedal
- Wide gap between angle and pedal
- Voltage of inching sensor(AU1) is out of
standard.(Need adjustment)
- Signals of sensor No 1 and No 2 are different.
(Need adjustment)
- Error while inching operation.
7-20
Remark
Advertisement
