(4)
Remove the assembling bolts(3) with
washers(4) from the working section(14).
(5)
Remove the square-ring(13) from the
working section.
(6)
Remove the through shaft(15) from the
drive gear(16).
(7)
Remove the pressure plate(9) with related
parts(7, 8) from the working section and
examine it carefully.
(8)
Remove the drive gear(16) and driven
gear(11) from the rear working section,
keeping gears as straight as possible also.
(9)
Remove the pressure plate(9) with related
pars(7, 8) from the working section and
examine it carefully.
Take care not to strike the gears against
hard surfaces which could damage the
gear teeth. Keep the two shaft together.
4
3
13
15
11
16
6-39
13
14
100D7PMP05
17
9
8
7
100D7PMP06
7
8
9
17
100D7PMP07