Advertisement
(2)
Assembly of the piston seals
Place piston with the larger diameter downwards. Note succession of the sealing parts at fitting.
Install O-rings free of torsion and loops.
(3)
Assembly of O-ring and supporting ring
Install the supporting rings to the averting side of pressure.
1
Large supporting ring
2
Large O-ring
(4)
Assembly of the Omegat seal kit
Install the PTFE-profile rings with small diameter to pressure side.
For assembly there can be used mounting tapes from Merkel company.
1
Large O-ring
2
Small O-ring
Pressure
3
Small O-ring
4
Small supporting ring
Pressure
3
Large supporting ring
4
Small supporting ring
3-144
100D7XL73/84
100D7XL74/85
Advertisement
