Advertisement
7)
ASSEMBLY DRIVE ASSEMBLY
Adjustment of gear meshing of gleason gears
(1)
Perfect marking
To become a perfect gear meshing is only
possible, if the fabrication number of the drive
pinion (marked on the end face) and the ring
gear(marked on the circumference) are
corresponding.
Improper gear meshing marks
The following figures are showing improper gear meshing marks of the ring gear. The text
alongside gives the corrections to obtain correct gear meshing. The dark colored arrows in the
sketch of the drive pinion and ring gear are indicating the direction towards which the drive pinion
has to be moved. The clear arrows are indicating the direction towards which the ring gear has
to be moved, to get further more a correct backlash.
Gear meshing to deep
¤Ł
Increase the drive pinion distance by
correction of the adjustment disk
thickness. Regulate the backlash by
inwards moving of the ring gear.
Gear meshing to high
¤Ø
Decrease the drive pinion distance by
correction of the adjustment disk
thickness. Regulate the backlash by
outwards moving of the ring gear.
3-123
100D7XL22
100D7XL23
100D7XL24
Advertisement
