Advertisement
Install the O-rings(3) and fasten the
suction pipe(1) by means of cap scre-
ws(2).
Tightening torque(M8/8.8) - - - M
Grease the rectangular rings(see
arrows) and align them, centrically.
Wet the mounting face with sealing com-
pound loctite(Type No.574)
Cautiously place the transmission
housing rear section(1) by means of the
lifting equipment to the transmission
housing front section(2) until contact is
obtained.
(S)Eyebolts 2x(M20)
(S)Ring nut(M12)
(S)Lifting chain
Install both cyl. pins(1) centrally to the
mounting face.
By means of cap screws(2 and 3) fasten
the transmission housing rear section to
the transmission housing front section.
Cap screws with different lengths.
Tightening torque(M8/8) - - - - - - M
2
=2.3kg m
A
0636 804 003
0664 462 774
5870 281 047
=4.7kg m
A
3-98
3
2
1
2
2
1
D507TM178
D507TM179
1
D507TM180
1
3
D507TM181
Advertisement
