LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
Maintenance Manual
Prerequisites
●
●
●
Procedure
Step 1 Remove the faulty light.
During replacement, do not touch the ends of the light with bare hands.
Otherwise, electric shocks may occur.
Step 2 Install a new light in the original position.
----End
Follow-up Procedure
Step 1 Turn on the DC switch of the light in the ESS.
Step 2 Check whether the lighting function is restored.
----End
Issue 04 (2023-06-30)
11
Fault locating: If the power supply is normal but the light is off, the light is
damaged.
Tools: flat-head or Phillips insulated torque screwdriver, cable cutter, insulation
tape
Power-off: Turn off the DC switch of the light in the ESS.
CA UTION
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Replacing a Light
Replacing a Light
78