Replacing A Light - Huawei MTS9300A User Manual

MTS9300A Telecom Power (Ooredoo, Indonesia,
MTS9304A-HD2002)
User Manual
Figure 4-14 Position of a battery temperature sensor
Step 4 Properly place the new battery temperature sensor and bind it securely with a
cable tie.
Step 5 Reconnect the battery temperature sensor cable to the UIM.
Step 6 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist
strap and ESD gloves.
----End

4.3.9 Replacing a Light

Prerequisites
●
●
Procedure
Step 1 Disconnect the power supply to the light.
Step 2 Remove the damaged light.
Step 3 Install a new light.
Issue 06 (2021-10-13)
You have obtained the cabinet door key, and phillips screwdriver.
The new light is intact.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
60