Huawei LUNA2000-97KWH-1H1 Maintenance Manual page 109

LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
Maintenance Manual
Figure 19-2 Removing the door status sensor
Step 4 Remove the enclosure of the new sensor, and then remove the screws from the
alarm cables.
Step 5 Place the new door status sensor to the installation position and tighten the
screws.
Step 6 Connect the alarm cables in sequence and tighten the screws.
Step 7 Reinstall the enclosure of the door status sensor.
----End
Follow-up Procedure
Check that the door status alarm is cleared.
Issue 04 (2023-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd.
19 Replacing a Door Status Sensor
103