How Can I Export Device Logs - Huawei LUNA2000-97KWH-1H1 Maintenance Manual

LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
Maintenance Manual

29.4 How Can I Export Device Logs?

Step 1 Access the device log page of the CMU or SmartLogger3000.
Figure 29-5 Log export
Step 2 Select the target device and click Export Log.
Step 3 Observe the progress bar and wait until the log export is complete.
Step 4 After the export is successful, click Log archiving to save the logs.
----End
Issue 04 (2023-06-30)
NO TE
● Logs of two or more types of devices cannot be exported at a time. For example, you
cannot select both SUN2000 and MBUS.
● Logs can be exported for a maximum of six devices of the same type at a time.
● Device log: Select the target device and click Export Log. The check box is displayed.
You can select a specific log option.
● If the active power control mode is set to Grid connection with limited power or
Remote communication scheduling, and the reactive power control mode is set to
Power factor closed-loop control or the working mode of Battery Control is enabled,
you are advised to export logs when inverters and Smart PCSs are disconnected from
the grid. Otherwise, power control may be abnormal or the log export may fail.
Copyright © Huawei Digital Power Technologies Co., Ltd.
29 FAQ
136