Huawei LUNA2000-97KWH-1H1 Maintenance Manual page 134

LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
Maintenance Manual
Paint Damage
Logo and pattern
damage
Dent
Procedure
Step 1 Gently polish damaged areas using fine sandpaper to remove smudges or rust.
Figure 29-1 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or
damaged area to remove the dirt and dust. Then wipe off the anhydrous alcohol
with a clean and dry cotton cloth
Issue 04 (2023-06-30)
Tool and
Material
If a logo or pattern is damaged,
provide the logo size and color
number. Seek help from a local
supplier of advertisement coatings to
formulate a repair solution based on
the logo size, color, and damage.
1. If a dent is less than or equal to
100 mm
mm in depth, fill the dent with
Poly-Putty base and then perform
the same operations as those for
processing deep scratches.
2. If a dent is greater than 100 mm
area or greater than 3 mm in
depth, ask the local supplier for an
appropriate repainting solution.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Procedure
2
in area and less than 3
29 FAQ
Description
even. Paint
drops are
prohibited on
the coating.
The surface
should be
smooth.
5. Leave the
repainted area
for
approximately
30 minutes
before
2 performing any
in
further
operation.
128