Huawei LUNA2000-97KWH-1H1 Maintenance Manual page 113

LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
Maintenance Manual
Table 21-1 DIP switch settings
Toggle
Switch 1
1
Step 2 Disconnect cables from the T/H sensor.
Step 3 Removing the faulty T/H sensor.
Step 4 Set the DIP switches for a new T/H sensor based on the recorded information.
Step 5 Install the new T/H sensor.
Step 6 Connect the cables.
Step 7 Check that no alarm is generated.
----End
Issue 04 (2023-06-30)
Toggle
Switch 2
2
Copyright © Huawei Digital Power Technologies Co., Ltd.
Toggle Toggle
Switch 3 Switch 4
3 ON
21 Replacing a T/H Sensor
Toggle Toggle
Switch 5 Switch 6
ON ON
107