Install The Load Sense Hoses - Raven SmarTrax Installation Manual

Install the Load Sense Hoses

Machine's Existing Load Sense Hose
FIGURE 9.
Disconnect the machine's existing load sense hose from the steering orbital.
1.
Load Sense Hose Installed
FIGURE 10.
Install the male end of the supplied hydraulic hose (P/N 214-1000-622) on the end of the machine's load
2.
sense hose.
Connect the female end of the installed hydraulic hose to the fitting installed in Port LSPV of the SmarTrax
3.
valve.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-522) on the open load sense port of the
4.
steering orbital.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port LS STEER of the
5.
SmarTrax valve.
P/N 016-4001-100 Rev. C
Hydraulic System Installation
15