Install The Load Sense Hoses - Raven SmarTrax Installation Manual

Chapter 3

Install the Load Sense Hoses

Load Sense Port on the Steering Orbital
FIGURE 12.
Disconnect the machine's load sense hose from the steering orbital.
1.
Install the male end of the supplied hydraulic hose (P/N 214-1000-464) on the end of the machine's load
2.
sense hose.
Connect the female end of the installed hydraulic hose to the fitting installed in Port LSPV on the SmarTrax
3.
valve.
Install the -4 ORFS end of the supplied hydraulic hose (P/N 214-1000-665) on the open port of the steering
4.
orbital.
Note:
It may be necessary to install a -4 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-023) in the
open port of the steering orbital to achieve the connection.
SmarTrax Valve LS STEER Hose Connections
FIGURE 13.
Connect the -6 ORFS end of the installed hydraulic hose to the fitting installed in Port LS STEER of the
5.
SmarTrax valve.
16 Case IH Titan 3030 and 3530, Model Year 2013 & Newer SmarTrax™ Installation Manual