Table of Contents
Advertisement
Special Functions
The escape alarm can only be cancelled via the
Setting the time for the pre-alarm is done for all alarm types together.
Event
Mandown, No movement, Escape
detected
Delay
Other alarm parameter settings
Alarm number: If the SOS emergency call number is predefined by the
system, this menu entry does not appear.
Forum 500 / Forum 5000 systems only: Always save the SOS
emergency call number with the prefixed R-key function (enquiry/
hold). Then an emergency call can also be made during a call
(depending on mobile unit – see above). Press the
to enter the R key function.
Other systems: The "Hold" function may be generated using other
codes on other systems. The respective system documentation
provides information on suitable programming.
If there is no alarm number saved, the SOS emergency call number – if
there is one – is called alternatively.
Alarm auto answer: If the function is activated, any call is automatically
accepted during Pre call. If the function is deactivated and there is an
incoming call during pre-alarm, or a call already being made, the alarm
call number is dialled after pre-alarm.
No matter what the setting, calls from the alarm call number or the
SOS emergency call number are automatically accepted and pre-alarm
ended.
Alarm tone: Pre-alarm can take place with/without an alarm tone on the
mobile unit. When the alarm tone is activated, it is signalled with
increasing volume.
50
Pre alarm
with/without alarm
tone on the mobile unit
Esc softkey.
Dialling of the
alarm call number
hash key 3 times
Basic Functions
Advertisement
Table of Contents
